LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Replacement - Instrument Panel (I/P) Accessory >> Installation Procedure

Installation Procedure

  1. Connect the ash tray harness electrical connector to the I/P harness.
  2. Align the accessory trim plate to the I/P.
  3. Install the tabs into the I/P openings.
  4. Rotate the I/P accessory trim plate forward and press the clips into the retainers until fully seated.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Install the screws to the I/P accessory trim plate.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

    Fig 1: Installing I/P Accessory Trim Plate & Mounting Bolts
    G01587461Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals