LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Trim Plate Replacement - Console Front >> Removal Procedure

Removal Procedure

  1. Remove the front floor console trim plate starting at the front and working back, pulling the front floor console trim plate upward in order to release the tabs from the retainers.
  2. Disconnect the electrical connectors from the traction control switch, if equipped. Refer to TRACTION CONTROL SWITCH REPLACEMENT in Antilock Brake System.
  3. Remove the front floor console trim plate from the vehicle.
    Fig 1: Removing Front Floor Console Trim Plate
    G01587518Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals