LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Lock Cylinder Replacement - Instrument Panel (I/P) Compartment Door >> Installation Procedure

Installation Procedure

  1. Position the instrument panel compartment latch fork bolt in the up position.
  2. Grasp the instrument panel compartment lock cylinder. Depress the rear-most, light-colored tumbler that is flush with the instrument panel compartment lock cylinder surface.
  3. Insert the key.

    All the tumblers will now stay depressed.

  4. Insert the instrument panel compartment lock cylinder, with the key inserted, into the instrument panel compartment latch housing. Ensure that the front projection pin is at the appropriate 8 o'clock position.

    The instrument panel compartment lock cylinder will drop into place.

  5. Rotate the key counterclockwise until the key stops.
    Fig 1: Installing Instrument Panel Compartment Lock Cylinder
    G01587483Courtesy of GENERAL MOTORS CORP.
  6. Remove the key, the tumblers will now release.

    The instrument panel compartment lock cylinder is now locked into the instrument panel compartment latch housing.

  7. Install the instrument panel compartment latch. Refer to LATCH REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT  .
scientia non olet · About LEMON Manuals