Installation Procedure
- Install the knee bolster to the instrument panel (I/P).NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
- Install the bolts which secure the knee bolster to the steering column support.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
- Install the bolts which secure the knee bolster to the I/P.
Tighten
Tighten the bolts to 2 N.m (18 lb in).
- Install the steering column opening filler. Refer to STEERING COLUMN FILLER REPLACEMENT .
- Install the left I/P insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT .