LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector to the cluster.
    Fig 1: Connecting Electrical Connector To I/P Cluster
    G01587500Courtesy of GENERAL MOTORS CORP.
  2. In order to install the IPC, perform the following procedures:
    1. 2.1. Rotate the top of the cluster forward.
    2. 2.2. Engage the locating pins on the bottom of the cluster.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the screws to the IPC.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

    Fig 2: Installing Screws To I/P Cluster
    G01587501Courtesy of GENERAL MOTORS CORP.
  4. Install the IPC trim plate. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER  .
scientia non olet · About LEMON Manuals