Removal Procedure
- Apply the parking brake.
- Position the transaxle shift lever to the LOW position.
- Remove the floor console trim plate. Refer to TRIM PLATE REPLACEMENT - CONSOLE FRONT
.
- Remove the floor console rear compartment mat.
Courtesy of GENERAL MOTORS CORP.
- Remove the floor console rear compartment bolts.
- Remove the floor console bracket bolts rearward of the transaxle shift lever.
Courtesy of GENERAL MOTORS CORP.
- Remove the floor console horizontal bolts near the instrument panel (IP).
Courtesy of GENERAL MOTORS CORP.
- Remove the floor console power accessory port. Refer to POWER ACCESSORY PORT REPLACE - FRONT FLOOR CONSOLE
.
- Remove the floor console lighter. Refer to CIGAR LIGHTER REPLACEMENT - CONSOLE
.
- Disconnect the wiring harness from the floor console.
Courtesy of GENERAL MOTORS CORP.
- Pull the floor console rearward in order to release the retainers from the IP.
Courtesy of GENERAL MOTORS CORP.
- Depress the front edge of the shifter trim plate in order to pull back the floor console for removal.
- Remove the floor console from the vehicle.
Courtesy of GENERAL MOTORS CORP.