LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Wheel Cylinder >> Removal

Wheel Cylinder: Removal

  1. Raise support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the brake drum. See BRAKE DRUM  .
  4. Remove the brake shoes. See BRAKE SHOE  .
  5. Clean the dirt and foreign material around the wheel cylinder.
  6. Remove the bleeder valve.
  7. Disconnect the brake pipe fitting from the wheel cylinder. Plug the open brake pipe ends.
  8. Remove the wheel cylinder mounting bolts.
  9. Remove the wheel cylinder.
scientia non olet · About LEMON Manuals