LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Park Brake Cable (Rear Disc) >> Installation

Park Brake Cable (Rear Disc): Installation

  1. Position the park brake cable into the support bracket and install the cable retaining pin. Install the park brake cable to the actuator lever.
  2. Connect the retainer that holds the cable to the support bracket. Connect the rear cable to the front cable.
  3. For the right rear cable, connect the cable to the clip. For the left rear cable, install the equalizer stud to the equalizer nut, which is part of the equalizer assembly.
  4. Adjust the park brake. See DISC PARK BRAKE ADJUSTMENT  or DRUM PARK BRAKE ADJUSTMENT  under PARK BRAKE in ADJUSTMENTS & INSPECTIONS.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals