LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Drum Brake Adjusting Hardware >> Removal

Drum Brake Adjusting Hardware: Removal

  1. Raise and support the vehicle.
  2. Remove the rear tire and wheel assembly.
  3. Remove the brake drum. See BRAKE DRUM  .
  4. Remove the adjuster spring.
  5. Remove the adjuster actuator lever. See Figure .
scientia non olet · About LEMON Manuals