LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Disc Hardware (Rear) >> Installation

Disc Hardware (Rear): Installation

  1. Clean all parts in clean, denatured alcohol.
  2. Dry with low pressure, non-lubricated, filtered air.
  3. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
  4. Lubricate the brake caliper pin bolt sleeves with high temperature silicone lubricant.
  5. Install the brake caliper bracket. See CALIPER BRACKET (REAR)  .
  6. Install the brake pad retainers to the bracket caliper bracket.
  7. Install the brake pads to the bracket caliper bracket.
  8. Install the brake caliper to the brake caliper bracket. See CALIPER BRACKET (REAR)  .
scientia non olet · About LEMON Manuals