LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Shoe >> Installation

Brake Shoe: Installation

  1. Connect the park brake lever to the secondary brake shoe and install the retaining clip.
  2. Position the hook end of the Brake Shoe Spanner and Spring Remover under the universal spring and lightly pull the universal spring end out while installing the secondary brake shoe. Ensure that the universal spring properly engages the brake shoe web hole.
  3. Position the hook end of the Brake Shoe Spanner and Spring Remover under the universal spring and lightly pull the universal spring end out while installing the primary brake shoe. Ensure that the universal spring engages the brake shoe web hole
  4. Use the Brake Shoe Spanner and Spring Remover to spread the top of the brake shoes to install the adjuster assembly and the adjuster lever to the brake shoe.
  5. Install the adjuster spring.
  6. Adjust the drum brake system. See DRUM BRAKE ADJUSTMENT  under DRUM BRAKES in ADJUSTMENTS & INSPECTIONS.
  7. Install the brake drum. See BRAKE DRUM  .
  8. Install the tire and wheel assembly.
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals