LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2003 >> Century Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Brake Pedal Assembly >> Installation

Brake Pedal Assembly: Installation

  1. Install the brake pedal and bushings. See Figure . Install the brake pedal nut and bolt. Tighten to specifications. See TORQUE SPECIFICATIONS  .
  2. Install the brake pedal washer and pushrod to the brake pedal.
  3. Install the brake pedal pushrod retaining clip to the brake pedal.
  4. Install the wiring harness clips to the bracket.
  5. Install the cruise control release switch, if equipped.
  6. Install the stoplight switch. See STOPLIGHT SWITCH  .
  7. Reposition and install the Body Control Module (BCM) into the retaining bracket.
  8. Install the left instrument panel insulator.
scientia non olet · About LEMON Manuals