Disc Brake Specifications
FRONT DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| Caliper Bore Diameter - Front | 2.50 (63.5) |
| Rotor Discard Thickness | 1.21 (30.7) |
| Rotor Maximum Allowable Lateral Runout | 0.002 (0.06) |
| Rotor Maximum Allowable Scoring | 0.059 (1.50) |
| Rotor Maximum Allowable Thickness Variation | 0.0005 (0.013) |
| Rotor Minimum Allowable Thickness After Refinish | 1.25 (31.7) |
| Rotor Thickness - NEW | 1.27 (32.2) |
REAR DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| Caliper Bore Diameter - Rear | 1.50 (38.1) |
| Rotor Discard Thickness | 0.35 (9.0) |
| Rotor Maximum Allowable Lateral Runout | 0.002 (0.06) |
| Rotor Maximum Scoring | 0.059 (1.50) |
| Rotor Maximum Allowable Thickness Variation | 0.0005 (0.013) |
| Rotor Minimum Allowance Thickness After Refinish | 0.41 (10.6) |
| Rotor Thickness - NEW | 0.43 (11.0) |