LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Regal LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Panel Replacement - Instrument Panel (I/P) Upper >> Installation Procedure

Installation Procedure

  1. Position the instrument panel (I/P) upper trim panel to the I/P.
    2. Fig 1: Identifying I/P Upper Trim Panel
    G01755270Courtesy of GENERAL MOTORS CORP.
  2. Position the ambient light sensor to the I/P upper trim panel opening. Rotate the sensor clockwise to secure the sensor into place.
  3. If equipped, position the sun load sensor to the I/P upper trim panel opening. Rotate the sensor clockwise to secure the sensor into place.
  4. Align the I/P upper trim panel locating pins and retainers to the slots in the I/P.
  5. Carefully push down and forward on the I/P upper trim panel to secure the panel into place.
  6. Install the windshield pillar garnish moldings in reverse of removal.
scientia non olet · About LEMON Manuals