Removal Procedure
- Remove the floor console trim plate. Refer to Trim Plate Replacement - Console Front .
- Remove the floor console rear compartment mat.
- Remove the floor console rear compartment bolts.
- Remove the floor console nuts.
- Remove the horizontal bolts near the Instrument Panel (I/P).
- Remove the floor console power accessory port. Refer to Power Accessory Port Replace - Front Floor Console (D55) or Power Accessory Port Replace - Front Floor Console (D06) .
- Disconnect the wiring harness from the floor console.
- Pull the floor console rearward in order to release the retainers from the I/P.
- Remove the floor console.