Removal Procedure

Apply the parking brake.
Position the transaxle shift lever to the LOW position.
Remove the floor console trim plate. Refer to Trim Plate Replacement - Console Front .
Remove the floor console rear compartment mat.

Fig 1: Identifying Floor Console Rear Compartment Mat
Courtesy of GENERAL MOTORS CORP.
Remove the floor console rear compartment bolts.

Fig 2: Identifying Floor Console Rear Compartment & Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the floor console bracket bolts rearward of the transaxle shift lever.
Remove the floor console horizontal bolts near the instrument panel (I/P).

Fig 3: Identifying Floor Console Horizontal Bolts
Courtesy of GENERAL MOTORS CORP.
Remove the floor console power accessory port. Refer to Power Accessory Port Replace - Front Floor Console (D55) or Power Accessory Port Replace - Front Floor Console (D06) .
Remove the floor console lighter. Refer to Cigar Lighter Replacement - Console .
Disconnect the wiring harness from the floor console.

Fig 4: Identifying Floor Console Wiring Harness
Courtesy of GENERAL MOTORS CORP.
Pull the floor console rearward in order to release the retainers from the I/P.

Fig 5: Disconnecting Floor Console From I/P Retainers
Courtesy of GENERAL MOTORS CORP.
Depress the front edge of the shifter trim plate in order to pull back the floor console for removal.

Fig 6: Depressing Front Edge Of Shifter Trim Plate
Courtesy of GENERAL MOTORS CORP.
Remove the floor console from the vehicle.