LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle) >> Repair Instructions >> Valve Rocker Arm and Push Rod Replacement >> Removal Procedure

Removal Procedure

  1. Remove the valve rocker arm covers. Refer to Valve Rocker Arm Cover Replacement - Left  or Valve Rocker Arm Cover Replacement - Right  .
  2. Remove the rocker arm bolts.
  3. Remove the rocker arms.
    NOTE: Place the valve train parts in a rack in order to ensure that they are installed in the same location from which they were removed. Intake pushrods measure 144.18 mm (5.68 in) long. Exhaust pushrods measure 152.51 mm (6.0 in) long.
    NOTE: Use care when removing the pushrods. Ensure that they do not fall down into the lifter valley.
  4. Remove the pushrods.
    Fig 1: Pushrod
    G01763588Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals