LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle) >> Repair Instructions >> Oil Pump Replacement >> Installation Procedure

Installation Procedure

NOTE: Rotate the driveshaft as necessary in order to obtain the engagement with the oil pump drive unit.
  1. Install the driveshaft and the oil pump.
  2. Install the oil pump bolt to the rear crankshaft bearing cap.

    Tighten: 

    Tighten the bolt to 41 N.m (30 ft lbs) 

  3. Install the oil pan. Refer to Oil Pan Replacement .
scientia non olet · About LEMON Manuals