LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle) >> Repair Instructions >> Oil Level Indicator and Tube Replacement >> Installation Procedure

Installation Procedure

  1. Clean the oil level indicator tube.
  2. Apply sealant around the oil level indicator tube 12.7 mm (0.50 in) below the bead. Use GM sealant P/N 12345493 (Canadian P/N 10953488) or the equivalent.
  3. Install the oil level indicator tube into the engine block.
  4. Install the oil level indicator tube bracket bolt.

    Tighten: 

    Tighten the bolt to 25 N.m (18 ft lbs) 

  5. Install the oil level indicator.
  6. Connect the spark plug wire to the number 6 cylinder spark plug.
scientia non olet · About LEMON Manuals