LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle) >> Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the engine oil pressure sensor.

    Tighten: 

    Tighten the sensor to 16 N.m (12 ft lbs) 

  2. Connect the engine oil pressure sensor electrical connector.
  3. Lower the vehicle.
  4. Check and fill the crankcase as necessary. Refer to Engine Oil and Oil Filter Replacement .
scientia non olet · About LEMON Manuals