LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle) >> Repair Instructions >> Engine Oil Level Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle.
  2. Remove the engine oil drain plug and drain the engine oil.
    Fig 1: Engine Oil Drain Plug
    G01763615Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the engine oil level sensor electrical connector.
  4. Remove the bolt from the engine oil level sensor.
  5. Remove the engine oil level sensor from the oil pan.
    Fig 2: Engine Oil Level Sensor Electrical Connector
    G01763616Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals