LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle) >> Repair Instructions >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

  1. Remove the automatic transaxle. Refer to TRANSMISSION REPLACEMENT in AUTOMATIC TRANSAXLE REMOVAL & INSTALLATION .
  2. Use the J 37096 to secure the flywheel in order to prevent rotation.
  3. Loosen the 6 flywheel bolts.
  4. Remove 5 of the 6 flywheel bolts leaving 1 bolt at the top of the crankshaft rotation.
  5. Grip the flywheel and remove the remaining bolt. Do not drop the flywheel when removing the final bolt.
  6. Remove the engine flywheel and the flywheel retainer.
  7. Clean the engine flywheel bolt threads and bolt holes.
    Fig 1: Engine Flywheel
    G01763661Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals