LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.1L V6 - VIN (J) (On-Vehicle) >> Repair Instructions >> Drive Belt Replacement >> Removal Procedure

Removal Procedure

  1. Remove the drive belt tension by lifting or rotating the drive belt tensioner off of the drive belt, using a 3/8-inch breaker bar (1).
    Fig 1: Untensioning Drive Belt
    G01763495Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt.
    Fig 2: Removing The Drive Belt
    G01763496Courtesy of GENERAL MOTORS CORP.