Pistons, Piston Pins & Piston Rings Specifications
PISTONS, PINS & RINGS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Pistons | |||||
| Diameter (Standard) | 3.5029-3.5040 (88.974-89.002) | ||||
| Clearance | .0013-.0027 (.033-.069) | ||||
| Pin Bore Diameter | .9057-.9060 (23.005-23.012) | ||||
| Pins | |||||
| Diameter | .9052-.9054 (22.992-22.997) | ||||
| Piston Fit (Clearance) | .0004-.0008 (.0102-.0203) | ||||
| Rod Fit (Interference) | .0006-.0018 (.015-.046) | ||||
| Rings | |||||
| No. 1 | |||||
| End Gap | .006-.014 (.15-.36) | ||||
| Side Clearance | .0020-.0033 (.051-.084) | ||||
| No. 2 | |||||
| End Gap | .020-.028 (.51-.71) | ||||
| Side Clearance | .0020-.0035 (.051-.089) | ||||
| No. 3 (Oil) | |||||
| End Gap | (1) | ||||
| Side Clearance (Maximum) | .008 (.20) | ||||
|
|||||