LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2002 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Plate Replacement - I/P Accessory >> Removal Procedure

Removal Procedure

  1. Remove the left instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the steering column filler. Refer to Steering Column Filler Replacement .
  3. Remove the screws from the bottom of the I/P accessory trim plate.
    Fig 1: Identifying I/P Accessory Trim Plate Bottom Screws
    G01755267Courtesy of GENERAL MOTORS CORP.
  4. Pull the I/P accessory trim plate rearward in order to release the retaining clips.
  5. Rotate the I/P accessory trim plate rearward and up in order to release the 2 tabs at the top edge.
  6. Disconnect the ash tray harness electrical connector from the I/P harness.
  7. Remove the I/P accessory trim plate.