LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Regal LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Upper Trim Pad Replacement >> Removal Procedure

Removal Procedure

Fig 1: View Of Sun Load Sensor
GM648588Courtesy of GENERAL MOTORS COMPANY
  1. Remove the windshield side garnish moldings.
  2. Lift the IP upper trim panel up approximately 51 mm (2 inches). Pull rearward to release IP upper trim panel retainers
  3. Rotate the ambient light sensor 1/4 turn counterclockwise to release it from the IP upper trim panel
  4. If equipped, rotate the sun load sensor 1/4 turn counterclockwise to release it from the IP upper trim panel
  5. Remove the IP upper trim panel from the IP
scientia non olet · About LEMON Manuals