LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Regal LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Upper Trim Pad Replacement >> Installation Procedure

Installation Procedure

Fig 1: View Of Sun Load Sensor
GM648588Courtesy of GENERAL MOTORS COMPANY
  1. Position the instrument panel (IP) upper trim panel to the IP.
  2. Install the ambient light sensor 1/4 turn clockwise to install it to the IP upper trim panel
  3. If equipped, install the sun load sensor 1/4 turn counterclockwise to install it to the IP upper trim panel
  4. Align the IP upper trim panel locating pins and retainers to the slots in the IP
  5. Carefully push down and forward on the IP upper trim panel to secure into place.
  6. Install the windshield side garnish moldings.
scientia non olet · About LEMON Manuals