LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Regal LS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Engine Oil Pressure Sensor or Switch Replacement (3.1L) >> Removal Procedure

Removal Procedure

Fig 1: View Of Oil Pressure Switch Location (3.1L)
GM82225Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the battery ground (negative) battery cable.
  2. Raise and suitably support the vehicle
  3. Disconnect the electrical connector from the engine oil pressure switch
  4. Remove the engine oil pressure switch
scientia non olet · About LEMON Manuals