Removal & Installation
- Using Trim Pad/Garnish Clip Remover (J-38778), remove push-in retainers from left instrument panel insulator. Remove courtesy light from insulator. Pull insulator forward from stud at accelerator pedal, and remove left instrument panel insulator.
- Remove bolts/screws from bottom of steering column opening filler. Pull steering column opening filler rearward and upward to unsnap, and remove it from instrument panel.
- Disconnect Driver Information Center (DIC) harness connector. Using small flat-blade tool, depress retainers on DIC. Remove DIC from steering column filler.
- To install, reverse removal procedure. Tighten instrument panel cluster trim plate screws to 18 INCH lbs. (2 N.m).