Test AE: Security Indicator Inoperative
- If theft deterrent system diagnostic system check has been performed, go to next step. If theft deterrent system diagnostic system check has not been performed, perform theft deterrent system diagnostic system check. See THEFT DETERRENT SYSTEM DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.
- Observe SECURITY indicator. Turn ignition switch to RUN position. If SECURITY indicator does not illuminate during displays test, go to next step. If SECURITY indicator illuminates during displays test, system is okay.
- Replace instrument panel cluster. See INSTRUMENT PANEL CLUSTER under REMOVAL & INSTALLATION. After repair, go to next step.
- Operate system to verify repair. If system does not operate properly, go to step 2 . If system operates properly, system is okay.