DTC C1248: Dynamic Rear Proportioning (DRP) Circuit Malfunction ("W" Body)
- Perform diagnostic system check. See DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING. After performing diagnostic system check, go to next step.
- Install scan tool. Turn ignition on, with engine off. Select display DTCs function on scan tool for the EBCM. If scan tool displays any ABS/TCS DTCs, diagnose affected DTCs. If no ABS/TCS DTCs are displayed, go to next step.
- Using scan tool, clear DTCs. Recheck DTCs. If DTC resets, go to step 2. If DTC does not reset, problem is intermittent.