Removal Procedure
- Pull back the rear compartment trim as required to access the lock striker. Refer to Rear Compartment Trim Panel Replacement (One Piece) or Rear Compartment Trim Panel Replacement (Two Piece) .
- Use a grease pencil to mark the location of the lock striker to the rear compartment for its location at installation.
Courtesy of GENERAL MOTORS CORP.
- Remove the bolt from the rear compartment lid lock striker in the rear compartment.
- Remove the rear bumper fascia.
- Remove the rear compartment lid lock striker bolts from under the rear bumper fascia above the impact bar to the body panel.
- Remove the rear compartment lid lock striker from the rear compartment body panel.