Removal Procedure
- Remove the left instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Replacement (LH) .
- Remove the steering column filler. Refer to Steering Column Opening Filler Replacement
- Remove the screws from the bottom of the I/P accessory trim plate.
Courtesy of GENERAL MOTORS CORP.
- Pull the I/P accessory trim plate rearward in order to release the retaining clips.
- Rotate the I/P accessory trim plate rearward and up in order to release the 2 tabs at the top edge.
- Disconnect the ash tray harness electrical connector from the I/P harness.
- Remove the I/P accessory trim plate.