LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Cluster Replacement >> Removal Procedure

Removal Procedure

IMPORTANT: The ignition switch must be in the OFF position when removing the instrument panel cluster
Fig 1: IPC & Screws
GM326089Courtesy of GENERAL MOTORS COMPANY
  1. Remove the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement 
  2. Remove the screws from the instrument panel clus
  3. Rotate the top of the instrument panel cluster rearward and disengage the locating pins on the bottom of the instrument panel cluster
    4. Fig 2: IPC Electrical Connector
    GM326091Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the electrical connector from the instrument panel cluster.
  5. Remove the instrument panel cluster from the instrument panel
scientia non olet · About LEMON Manuals