LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Cluster Replacement >> Installation Procedure

Installation Procedure

Fig 1: IPC Electrical Connector
GM326091Courtesy of GENERAL MOTORS COMPANY
  1. Connect the electrical connector to the instrument panel cluster
    2. Fig 2: IPC & Screws
    GM326089Courtesy of GENERAL MOTORS COMPANY
  2. Position the locating pins on the bottom of the instrument panel cluster to the pin receivers in the instrument panel.
  3. Install the instrument panel cluster rotating the top of the instrument panel cluster forward and ingage the locating pins on the bottom of the instrument panel cluster.
  4. Install the screws to the instrument panel cluster. Tighten Tighten the instrument panel cluster bolts to 2 N.m(18 lb in).
  5. Install the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement 
scientia non olet · About LEMON Manuals