LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Front Floor Console Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable
  2. Apply the parking brake
  3. Position the transaxle shift lever to the LOW position
  4. Remove the front floor console trim plate. Refer to Console Front Trim Plate Replacement 
    5. Fig 1: Floor Console Trim Plate & Rear Compartment Mat
    GM326131Courtesy of GENERAL MOTORS COMPANY
  5. Remove the rubber mat from the storage compartment in the front floor console
    6. Fig 2: Rear Compartment Bolts
    GM326124Courtesy of GENERAL MOTORS COMPANY
  6. Remove the bolts from the storage compartment area of the front floor console
  7. Remove the bolts from the front floor console mounting bracket at the rear of the transaxle shift lever
    8. Fig 3: Rear Compartment Horizontal Bolts Near I/P
    GM326126Courtesy of GENERAL MOTORS COMPANY
  8. Remove the bolts from the LH and RH front sides of the front floor console
  9. Remove the front floor console power accessory port
  10. Remove the front floor console cigrette lig
    11. Fig 4: Floor Console Wiring Harness
    GM326133Courtesy of GENERAL MOTORS COMPANY
  11. Disconnect the wiring harness from the front floor console
    12. Fig 5: Pulling Floor Console From I/P Retainers
    GM689957Courtesy of GENERAL MOTORS COMPANY
  12. Pull the front floor console rearward in order to release the retainers from the instrument panel
    13. Fig 6: Depressing Front Edge Of Shift Trim Plate
    GM689951Courtesy of GENERAL MOTORS COMPANY
  13. Depress the front edge of the shifter trim plate in order to pull back the front floor console for removal
  14. Remove front floor console from the vehicle
scientia non olet · About LEMON Manuals