LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Electronic Traction Control Switch Replacement >> Installation Procedure

Installation Procedure

Fig 1: Traction Control Switch & Electrical Connectors
GM629741Courtesy of GENERAL MOTORS COMPANY
  1. Connect the electrical connector to the traction control switch
  2. Connect the electrical connectors to the heater seat switches.
  3. Position the traction control/heated seat switch to the front floor console trim
  4. Install the traction control/heated seat switch into the console trim plate pressing in until the retainers are fully seated.
scientia non olet · About LEMON Manuals