LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2001 >> Century Custom >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Instrument Panel Cluster >> Removal & Installation

Removal & Installation

  1. Remove Instrument Panel Cluster (IPC) trim plate. Remove retaining screws from instrument panel cluster.
  2. Rotate top of panel cluster rearward, and disengage locating pins on bottom of panel cluster at instrument panel. Disconnect electrical connector. Remove instrument panel cluster.
  3. To install, reverse removal procedure. Tighten instrument panel cluster retaining screws to 18 INCH lbs. (2 N.m).
scientia non olet · About LEMON Manuals