"C", "F", "G", "H" & "W" Body (Except Intrigue)
- With gearshift lever in "P" position and ignition switch in LOCK position, gearshift lever should not be allowed movement to other gear positions and ignition key should be removable from lock cylinder.
- With ignition switch turned to ON position and gearshift lever in "N" position, ensure ignition switch cannot be turned to LOCK position. If system does not operate as specified, unlock park lock cable adjuster (button up). See Fig 1. Move cable connector nose forward to remove slack, then lock park lock cable adjuster (button down). Recheck operation.
- If key cannot be removed in "P" position, then unlock park lock cable adjuster (button up) and move cable connector nose rearward until key can be removed from ignition switch. Lock cable adjuster (button down) and recheck operation.
Courtesy of GENERAL MOTORS CORP.