Hydraulic Hose: Installation

WARNING: This page is about a different car, the 1997 Pontiac Firebird, 1997 Chevrolet Camaro, 1996 Pontiac Firebird, and 1996 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When reconnecting quick connect hydraulic hose fittings, pull back on fittings to verify engagement. DO NOT rely on audible click or visual verification. Also check clutch hydraulic hoses for twists or kinks.

To install, reverse removal procedure. Tighten all bolts and nuts to specification. See TORQUE SPECIFICATIONS table. Check NEW "O" ring for proper placement on hose. Rotate hose to ensure freedom of movement. Bleed hydraulic system. See BLEEDING HYDRAULIC SYSTEM .