Clutch Pedal Anticipate Switch: Removal
WARNING: This page is about a different car, the 1997 Pontiac Firebird, 1997 Chevrolet Camaro, 1996 Pontiac Firebird, and 1996 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Remove left instrument panel lower insulator panel. Using a flat-blade tool, carefully pry instrument panel courtesy lamp assembly from left lower closeout panel. Remove push-on retaining nut from steering column bracket stud.
- Disconnect left lower closeout panel twist-rivets from instrument panel lower support beam. Insert instrument panel courtesy lamp assembly up through closeout panel. Lower and remove closeout panel. Disconnect clutch anticipate switch electrical connector and remove switch from bracket.