Clutch Master Cylinder: Installation
WARNING: This page is about a different car, the 1997 Pontiac Firebird, 1997 Chevrolet Camaro, 1996 Pontiac Firebird, and 1996 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Install clutch master cylinder and reservoir. Lubricate the push rod bushing on the clutch pedal. To complete installation, reverse removal procedure. Tighten bolts and nuts to specification. Refer to the TORQUE SPECIFICATIONS table. Bleed hydraulic system. Refer to BLEEDING HYDRAULIC SYSTEM .