LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1997 >> Park Avenue Ultra >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Axle Shafts - Front) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 1996 Pontiac Grand Prix, 1996 Oldsmobile Cutlass Supreme, 1996 Chevrolet Monte Carlo, 1996 Chevrolet Lumina, and 1996 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Shaft Hub Nut 151 (205)
Ball Joint-To-Steering Knuckle Bolt/Nut (1) 63 (85)
Brake Caliper Bolt 148 (200)
Bracket Bolt 148 (200)
Slide Bolt 80 (108)
CV Boot Clamp
Large Boot Clamp 130 (176)
Small Boot Clamp 100 (136)
Hub & Bearing Assembly Bolts 52 (71)
Wheel Lug Nut 100 (136)
(1) Tighten to torque specified. If necessary, tighten nut to align cotter pin hole, but no more than 60 degrees (one flat).