LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1997 >> Park Avenue Ultra >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 - VINS [K,1] >> Removal & Installation >> Crankshaft Rear Oil Seal >> Removal & Installation (VIN "1")

Removal & Installation (VIN "1")

Remove transaxle. See appropriate TRANSMISSION SERVICING (A/T models) articles listed below. Remove flexplate/flywheel. Pry seal from bore with a screwdriver (DO NOT damage crankshaft or seal bore). To install, apply engine oil to NEW seal. Press seal into bore using Seal Installer (J-38196). To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals