LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1997 >> Park Avenue Ultra >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 - VINS [K,1] >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

  1. Disconnect negative battery cable. Remove engine. See ENGINE . Remove intake manifold. See INTAKE MANIFOLD. Remove rocker arms and push rods. See ROCKER ARMS & PUSH RODS .
  2. Remove valve lifters. Remove timing chain and sprockets. See TIMING CHAIN & SPROCKETS . Remove camshaft thrust plate and camshaft. Using Remover/Installer (J-33049), remove camshaft bearings (if necessary).
scientia non olet · About LEMON Manuals