Diagnostic System Check
- Press horn switch. If all horns operate, go to next step. If one horn is inoperative, go to ONE HORN INOPERATIVE.
- Press horn switch. If horn tone is okay, go to next step. If horn tone is poor, go to POOR HORN TONE.
- Press key fob lock/unlock buttons. If horns pulse for each button, go to next step. If horns do not pulse for each button, go to HORNS INOPERATIVE.
- Press horn switch. If horns sound, go to next step. If horns do not sound, go to HORNS INOPERATIVE.
- Release horn switch. If horns are sounding, go to HORNS ON AT ALL TIMES OR PULSING CONTINUOUSLY. If horns are not sounding, system is operating properly.