LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1994 >> Skylark Limited, 3.1 M >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Adjustments >> Wheel Bearings

Wheel Bearings

NOTE: Hub and bearing assemblies are pre-adjusted and pre-lubricated, and require no routine maintenance or adjustment. If faulty, replace as a complete assembly.

Raise and support vehicle. Remove wheel. Remove brake drum. Mount dial indicator so stem rests against hub. Push hub inward. Adjust indicator to zero. Pull hub outward. Note dial indicator reading. Replace hub and bearing assembly if movement exceeds .005" (.12 mm).

scientia non olet · About LEMON Manuals