Camber Adjustment
WARNING: This page is about a different car, the 1994 Pontiac Sunbird and 1994 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
To adjust front camber, loosen 2 strut-to-steering knuckle bolts. See Fig 1 . Move top of wheel in or out to obtain correct camber specification. While holding wheel in position, tighten 2 strut-to-steering knuckle bolts. Rear camber is not adjustable. If rear camber is not to specification, repair or replace damaged or worn suspension or body parts.