LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1994 >> LeSabre Custom >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L V6 VIN L & 3.8L Supercharged V6 VIN 1 >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

  1. To install, reverse removal procedure. Fill radiator to base of filler neck. Start engine. Place heater-A/C control in A/C mode, at highest temperature setting.
  2. Raise engine speed to 3000 RPM and then back to idle 5 times to expel any trapped air in system. Refill radiator as necessary.
scientia non olet · About LEMON Manuals