LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 1994 >> LeSabre Custom >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L V6 VIN L & 3.8L Supercharged V6 VIN 1 >> Removal & Installation >> Crankshaft Rear Oil Seal >> Removal

Crankshaft Rear Oil Seal: Removal

  1. Remove transaxle. See appropriate CLUTCHES or AUTOMATIC TRANSMISSION SERVICING article. Remove flywheel. Confirm rear seal leak.
  2. To remove seal, pry around dust lip using a screwdriver. DO NOT damage crankshaft O.D. surface or chamfer. Ensure seal areas are clean.
scientia non olet · About LEMON Manuals